300Mbps Wireless N ADSL2+ Modem Router
- 25 -
• DHCP Server IP for Relay Agent: Enter the DHCP server IP Address runs on WAN
side.
Note:
If you select Disabled, the DHCP function will not take effect.
Radvd Enable: Enable or Disable the auto configuration of radvd.
DHVCPv6 Server: Enable or Disable the modem router working as a DHCPv6 Server.
4.2.3 Wireless
Go to Interface Setup → Wireless, and you will see the Wireless screen. Please configure the
parameters for wireless according to the descriptions below.
To Next Page
Loading...
