300Mbps Wireless N ADSL2+ Modem Router
- 8 -
Chapter 3 Quick Start
This chapter will show you how to configure the basic functions of your modem router using
Quick Setup Wizard within minutes.
1. If the TCP/IP Protocol on your computer is set to the static (fixed) IP address, you need to
change it to obtain an IP address automatically. Please refer to
Appendix A: Configuring
the PC for more detailed instruction.
2. Once your host PC is properly configured, launch a web browser and go to
http://mwlogin.net or 192.168.1.1.
3. Enter the default Username admin and the default Password admin, then click Login or
press Enter to access to the Quick Start.
Note:
A Quick Start window will pop up automatically when logging for the first time; otherwise,
select Quick Start from the menu and click RUN WIZARD.
4. Follow the steps below to set up your modem router quickly.
To Next Page
Loading...
