300Mbps Wireless N ADSL2+ Modem Router
- 7 -
Note:
The WPS function cannot be configured if the wireless function of the modem router
is disabled. Also, the WPS function will be disabled if your wireless encryption is WEP.
Please make sure the wireless function is enabled and is configured with the
appropriate encryption before configuring the WPS.
1) Tap the WPS icon on the device’s screen.
2) Immediately press the WPS button on your modem router.
3) The WPS LED flashes for about two minutes during the WPS process.
4) When the WPS LED is on, the client device has successfully connected to the
modem router.
Step 3: Attach the power adapter. The electrical outlet shall be installed near the device and
shall be easily accessible.
To Next Page
Loading...
