Name: Mercusys MW300D
Brand: Mercusys
Rating: 5 (1 reviews)

To Next Page

To Previous Page

MW300D

300Mbps Wireless N ADSL2+ Modem Router

- 45 -

4.4.2 Filter

Go to Access Management → Filter, you will see the Filter screen (the default is IP/MAC Filter

screen). The filtering feature includes IP/MAC Filter, Application Filter, and URL Filter. The

feature makes it possible for administrators to control users' access to the Internet and

protect the networks.

4.4.2.1 IP Filter

Select IP/MAC Filter as the Filter type, and select IP as the Rule type, then you can configure

the filter rules based on IP address. The filtering includes Outgoing and Incoming, and the

detailed descriptions are provided below.

• Filter Type Selection: Select the filter type for the configuration below.

• IP/MAC Filter Set Index: Select the Set index for the IP Filter entry. This index can match

with six IP / MAC Filter Rule Indexes.

• Interface: Select the interface for the entry.

Note:

If select PVC0~PVC7 as an interface, the filter will match the IP traffic of WAN port with

specified IPs (Source IP Address and Destination IP Address). If select LAN as an interface, the

filter will match the IP traffic of LAN port with specified IPs.

• Direction: Select the direction for this IP Filter rule. There are three filtering directions:

Both, Incoming and Outgoing.

Note:

Questions and Answers:

Need help?

Do you have a question about the Mercusys MW300D and is the answer not in the manual?

Mercusys MW300D Specifications

General