300Mbps Wireless N ADSL2+ Modem Router
- 51 -
• URL Filter Listing: This displays the information about the URL Filter rules.
To add a URL filter entry:
For example: If you want to forbid the user to access the website:
www.yahoo.com. Presume
the rule is aimed at the interface PVC0, and its index is 1.
Step 1: Select URL Filter as the Filter Type Selection.
Step 2: Select Index for the rule, and then enter the website in the URL field.
Step 3: Finally, select Yes to active the rule, and then click SAVE to save the entry.
Other operations for the entries:
Select URL Index to view or modify the entry.
Select URL Index to locate the specific rule, and then click DELETE to delete the entry.
4.4.3 SNMP
Go to Access Management → SNMP, you will see the SNMP screen. The Simple Network
Management Protocol (SNMP) is used for exchanging information between network devices.
• Get Community: Set the password for the incoming Get and Get next requests from the
management station.
• Set Community: Set the password for incoming Set requests from the management
station.
4.4.4 UPnP
Go to Access Management → UPnP, you can configure the UPnP in the screen.
UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. An UPnP device can dynamically
join a network, obtain an IP address, convey its capabilities and learn about other devices on
the network. In turn, a device can leave a network smoothly and automatically when it is no
longer in use. UPnP broadcasts are only allowed on the LAN.
To Next Page
Loading...
Need help?
General
