Meru Networks AP832 User Manual

Approved Antennas
© 2013 Meru Networks, Inc. Regulatory Information xxxv
Appendix B
Regulatory Information
The Meru Access Point (APs) must be installed and used in strict accordance with the
manufacturer’s instructions as described in the user documentation that comes with
the product. For country-specific approvals, see below. Meru Networks, Inc. is not
responsible for any radio or television interference caused by unauthorized modifi-
cation of APs, or the substitution or attachment of connecting cables and equipment
other than that specified by Meru Networks, Inc. The correction of interference
caused by such unauthorized modification, substitution or attachment is the respon-
sibility of the user. Meru Networks, Inc. and its authorized resellers or distributors
are not liable for any damage or violation of government regulations that may arise
from the user failing to comply with these guidelines.
Approved Antennas
Only approved antennas may be used in conjunction with AP832 access points. The following
antennas are approved for use with the AP832 series.
Part Numbers Manufacturer Gain Description
Meru Manufacturer
ANT-ABGN23O-W SOCAA 2/3 Dual-band
omnidirectional dipole
ANT-ABGN23O-W S24493TS Laird Technologies 3/4 Dual-band ceiling mount
omnidirectional 3-lead
ANT-6ABGN-24 M6025040MO1D3620P Terrawave 2.5/4 dBi Dual-band ceiling mount
omnidirectional 6-lead
ANT-ABGN47O ANT-DB1-RAF-RPS Linx Technologies 4.7/4.7 dBi Dual-band high gain dipole
omnidirectional
ANT-O6ABGN-0606-O M6060060MO1D3620O Terrawave 6/6 dBi Dual band omnidirectional
6-lead
ANT-I2ABGN-0304-O M6030040O1D3620DP Terrawave 3/4 dBi Dual-band ceiling mount
omnidirectional 2-lead

Meru Networks AP832 Specifications

General

Brand	Meru Networks
Model	AP832
Category	Wireless Access Point
Language	English