l Meru Access Point Installation Guide © 2013 Meru Networks, Inc.
AP Plenum Requirements
This Device Meets International Guidelines for Exposure to
Radio Waves
The AP832e and AP832i device includes radio transmitters and receivers. It is
designed not to exceed the limits for exposure to radio waves (radio frequency elec-
tromagnetic fields) recommended by international guidelines. The guidelines were
developed by an independent scientific organization (ICNIRP) and include a substan-
tial safety margin designed to ensure the safety of all persons, regardless of age and
health.
As such the systems are designed to be operated as to avoid contact with the
antennas by the end user. It is recommended to set the system in a location where
the antennas can remain at least a minimum distance as specified from the user in
accordance to the regulatory guidelines which are designed to reduce the overall
exposure of the user or operator.
The World Health Organization has stated that present scientific information does
not indicate the need for any special precautions for the use of wireless devices.
They recommend that if you are interested in further reducing your exposure then
you can easily do so by reorienting antennas away from the user or placing he
antennas at a greater separation distance then recommended.
This Device Meets FCC Guidelines for Exposure to Radio Waves
The AP832e and AP832i include radio transmitters and receivers. It is designed not
to exceed the limits for exposure to radio waves (radio frequency electromagnetic
fields) as referenced in FCC Part 1.1310. The guidelines are based on IEEE ANSI C 95.1
(92) and include a substantial safety margin designed to ensure the safety of all
persons, regardless of age and health.
As such the systems are designed to be operated as to avoid contact with the
antennas by the end user. It is recommended to set the system in a location where
the antennas can remain at least a minimum distance as specified from the user in
accordance to the regulatory guidelines which are designed to reduce the overall
exposure of the user or operator.
The device has been tested and found compliant with the applicable regulations as
part of the radio certification process.
Separation Distance
MPE Distance Limit
0.63 mW/cm2 20 cm (7.87 inches) 1.00 mW/cm2
Separation Distance
MPE Distance Limit
0.63 mW/cm2 20 cm (7.87 inches) 1.00 mW/cm2
To Next Page
Loading...
Need help?
General
