EasyManuals Logo

Meru Networks AP832 User Manual

Meru Networks AP832
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
Manufacturing Information
© 2013 Meru Networks, Inc. Regulatory Information xlv
Model AP150
Singapore
For the AP201 Rev 2, AP208 Rev 2, and OAP180, the following approval information applies:
For the AP300 series, the following approval information applies:
Manufacturing Information
The AP1000 and AP300 are built in Taiwan. Factory information is provided under NDA and
upon request.
AP Plenum Requirements
When installing APs in an air-handling space, as described in Article 300.22(C) of the
NEC (2005), the unit should only be powered by the Ethernet port (PoE), not by the
AC-powered power supply.
When the product is installed in air-handling spaces, the cables employed should be
suitable under NEC Articles 300.22 and 725 and marked accordingly, for use in
plenums and air-handling spaces with regard to smoke propagation, such as CL2-P,
CL3-P, MPP or CMP.
003NY06122 0000 003GZ06030 0000 003WY06046 0000
DA103798
IDA Standards
Complies with
DB102245
IDA Standards
Complies with

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Meru Networks AP832 and is the answer not in the manual?

Meru Networks AP832 Specifications

General IconGeneral
BrandMeru Networks
ModelAP832
CategoryWireless Access Point
LanguageEnglish

Related product manuals