13
QUICK
MEASURING
GUIDE
4
NOTE
Before using the device for the first time, read the instructions for use
carefully and follow the recommendations and suggestions. This chapter only
includes short instructions for the use of the MESI ABPI MD. For a detailed
description of the individual functions of the device, see Chapter 5 DETAILED
INSTRUCTIONS.
NOTE
When performing the ABI measurement, the patient must be in a supine
position and remain still.
NOTE
The MESI ABPI MD is intended for use in the professional environment, where
the measurements are carried out by adequately trained medical personnel.
The MESI ABPI MD is not intended for home use.
NOTE
The MESI ABPI MD may be used on pregnant women.
NOTE
The MESI ABPI MD is not intended for use on new-borns or children under the
age of 10 years.
NOTE
In case of the presence of intravenous cannulas or arteriovenous (AV) fistulas,
the cus and measurement can cause injury to the limb.
The MESI ABPI MD has two modes of operation:
• The primary mode is for ABI measurement. The result of the
measurement is the left Ankle-Brachial Pressure Index (Left ABI),
the right Ankle-Brachial Pressure Index (Right ABI), blood pressure
in all limbs (SYS, DIA, MAP) and the heart rate.
• The additional mode is for the independent measurement of the
upper arm blood pressure. The result of the measurement is the
upper arm blood pressure (SYS, DIA, MAP) and the heart rate.
QUICK MEASURING GUIDE
To Next Page
Loading...
