MESI ABPI MD - Manufacturer Declaration on Emc

43
STANDARD COMPLIANCE
11.1 MANUFACTURER DECLARATION ON EMC
MESI ABPI MD is intended for use in the electromagnetic environment
specified below. The customer or the user of the above listed
models should assure that they are used in such an environment.
Emissions test Compliance Electromagnetic
environment -
guidance
RF emissions
CISPR 11
Group 1 The above listed
models use RF energy
only for its internal
function. Therefore, its
RF emissions are very
low and are not likely to
cause any interference
in nearby electronic
equipment.
RF emissions
CISPR 11
Class B
MESI ABPI MD is
suitable for use in all
establishments, including
domestic establishments
and those directly
connected to the public
low-voltage power
supply network that
supplies buildings used
for domestic purposes.
Harmonic emissions
IEC 61000-3-2
N/A
Voltage fluctuations /
flicker emissions
IEC 61000-3-3
Complies
EN 301 489-1 V2.2.2
EN 301 489-17 V3.1.1
Electromagnetic Compatibility (EMC)
standard for radio equipment and services.
Part 1: Common technical requirements.
Harmonized Standard for Electromagnetic Com-
patibility
Electromagnetic Compatibility (EMC) standard for
radio equipment and services; Part 17: Specific con-
ditions for Broadband Data Transmission Systems;
Harmonized Standard covering the essential re-
quirements of article 3.1(b) of Directive 2014/53/EU
DescriptionReference number
(ID:year)