MESI ABPI MD - Performing an ABI Measurement

16
QUICK MEASURING GUIDE
PERFORMING
AN ABI
MEASUREMENT
4.1.4
Amputation option: If a patient has an
amputated limb or is not compliant for ABI
measurement due to severe and/or painful
wounds, the ABI can be measured only
on the patient’s existing limbs. Before the
measurement, you can disable a selected
cu by clicking on the button and
selecting the limb that is not compliant for
the measurement.
Step 1
Observe the position indication on the
cus and place them on the appropriate
arm or leg.
Then press START (1) and wait until the
measurement is completed.
Step 2
1