20
DETAILED
INSTRUCTIONS
5
This chapter contains all the information required by the users of
the device for safe, correct and accurate measurement. It includes
a detailed and complete description of all the functions of the
device, all safety instructions and all the information required to
understand the operation of the device.
5.1 FIRST TIME USE
BASIC
FUNCTIONALITIES
The MESI ABPI MD package includes MESI ABPI MD device, set
of colour-coded blood pressure cus (size M), AC/DC adaptor,
USB cable, instructions for use, calibration report and declaration
of conformity.
5.1.1
AC/DC ADAPTOR
AND BATTERY
The MESI ABPI MD uses the following two power sources:
• The mains electricity using AC/DC supply,
• Battery power.
Connect the AC/DC adapter into a wall power socket. Connect the
AC/DC adapter plug into the socket in the back side of the device.
5.1.2
Only use accessories and other parts recommended or supplied
by MESI. Use of any other parts may result in injury, inaccurate
measurements and/or damage to the unit. This product is not
designed for sterile use.
NOTE
The battery may not be completely discharged in a new device and it may
provide enough power to allow the device to start up. Nevertheless, the AC/
DC adapter must be connected when using the device for the first time.
The MESI ABPI MD can also function without the AC/DC power
supply. When the device is not connected to the mains electricity, it
is powered by a battery. The device is equipped with a high-capacity
Li-Po battery to ensure complete portability of the measurement
system. The battery is not replaceable.
DETAILED INSTRUCTIONS
To Next Page
Loading...
