39
GENERAL WARNING
Do not open the device. The device does not contain any parts which
can be replaced by a user. Do not alter or adapt the device.
Protect the device from moisture and liquids and extremely high/low
temperatures. Also protect the device from mechanical stress and do
not expose it to direct sunlight, as this can cause the device to not
function properly.
If the device is used or stored outside the specific temperature
range and air humidity, the accuracy specified within the technical
specifications of the device is not guaranteed.
When moving the MESI ABPI MD stand, be sure to push the trolley and
not the device.
7.4 FUNCTIONING OF THE DEVICE
The device may only be used by professional medical personnel.
The device is class A equipment and can cause radio interference or
even cause nearby devices to cease to function. It may be necessary
to reposition the MESI ABPI MD device or protect the room containing
the device from electromagnetic radiation.
It is mandatory to have the device calibrated once per year to ensure
the correct functioning and accuracy. Contact your dealer or the
manufacturer about calibrating the device.
NOTE
The EMISSIONS characteristics of this equipment make it suitable for use in
industrial areas and hospitals (CISPR 11 class A). If it is used in a residential
environment (for which CISPR 11 class B is normally required) this equipment
might not oer adequate protection to radio-frequency communication
services. The user might need to take mitigation measures, such as relocating
or re-orienting the equipment
Never carry out repairs of any kind yourself. If a defect occurs, consult
your dealer or distributor.
To Next Page
Loading...
