MESI ABPI MD - TROUBLESHOOTING; Unexpected Results and Solutions; Device Issues and Solutions

41
TROUBLESHOOTING/ WARRANTY INFORMATION
TROUBLE-
SHOOTING
9
Unexpected result.
Incorrect cuff placement. Reread the Instructions for
Use and place the cuffs
correctly.
Patient moved during
measurement.
Repeat the measurement
process.
Wrong cuff size used. Use cuffs of the correct size.
Possible air leakage. Check the cuffs, the air tubes
and the connectors, and
replace them if necessary.
If you cannot fix the issue
yourself, consult your dealer
or the manufacturer.
Audible stretching
of the fastening
tape.
Incorrect cuff placement. Reread the Instructions for
Use and place the cuffs
correctly.
Wrong cuff size used. Use cuffs of the correct size.
The cuffs do
not inflate.
Hissing noises.
Unexpected result.
Possible air leakage. Check the cuffs, the air tubes
and the connectors, and
replace them if necessary.
If you cannot fix the issue
yourself, consult your dealer
or the manufacturer.
Device not
responding.
Possible EMC disturbances. Press and hold the ON/OFF
button for at least 10 seconds.
NOTE
If the problem persists, contact the manufacturer or the local distributor for
further assistance.
WARRANTY
INFORMATION
10
A warranty period applies to the device, starting from the date of
purchase (delivery date shown on the invoice). Warranty claims will
only be valid if accompanied by the purchase receipt. More details
about the warranty can be found in the warranty booklet, attached
to the Instructions for Use.