METREL MD 9273 - Page 12

MD 9273 Leakage clamp Instrument Description
12
Low battery.
BLINK
Battery is close to empty.
Table 3: LCD screen indications
Inputs
Table 4 describes the inputs’ function.
Input
Description
COM
Common reference for voltage and power measurements; use black probe.
V
Voltage and power measurements active line input; use red probe.
Table 4: Inputs
Standby Mode
If the clamp-meter is not in use for a period of 15 minutes, the screen goes blank and the clamp-meter goes
into standby mode. To wake the meter from standby mode, turn the rotary switch to OFF position and then
back to the desired function to reactivate the screen. The Standby mode is disabled during active Bluetooth®
connection with other instrument.
Standard accessories
• Test probes,
• Crocodile clamps,
• Batteries (2 AA 1,5V batteries),
• Instruction manual,
• Carrying Case.