MI 3205 TeraOhm XA 5kV Communication
53
Step 3
Replace the battery of the same type.
Step 4
Insert the battery correctly and check polarity!
Step 5
Fix the battery cover back in place.
Ensure batteries are used and disposed of in accordance with Manufacturers guidelines
and in accordance with Local and National Authority guidelines.
Note:
Operator does not need to disconnect the instrument from mains supply after the
full recharging period. The instrument can be connected permanently.
Warnings:
Disconnect all measuring accessory, mains supply and switch off the
instrument before opening battery cover!
Use only VB 18650 rechargeable Li-ion battery provided by the
manufacturer!
To Next Page