Calibrateur multifonctions CX 1651
Manuel de l'utilisateur 173
Testing
When the calibrator is used as a tester, the results of the tests (PASS/FAIL) can be used to sort the products etc.
Contacts of the relay are connected to 140-41 cable adapter’s front panel using black terminals ∅ 4mm. Basic
definition of the status of the relay is performed using SETUP MENU and is valid for all test programs.
Specification
Uncertainties include long-term stability, temperature coefficient, linearity, load and line regulation and the
traceability of factory and National calibration standards. Specified accuracy is valid after one hour warm up in
temperature range 23 ± 2
o
C. Specified accuracy is one year accuracy.
Calibrator
Voltage
summary range DCV: 0 µV - 1000 V
summary range ACV: 1 mV – 1000 V
internal ranges: 20 mV, 200 mV, 2 V, 20 V, 240 V, 1000 V
frequency range: 20 Hz to 50 kHz bellow 20 V
20 Hz to 10 kHz bellow 200 V
20 Hz to 1000 Hz bellow 1000 V
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
Need help?
General
