￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Maintenance
￭￭￭￭￭￭￭￭
25
CAUTION
Damage to the lamp
Fingerprints and greasy deposits may damage the lamp.
Do not touch the glass part of the lamp or the inner side of the reflec-
tor.
1
Keeping the new lamp ready
￭ Take the new lamp out of the packaging.
￭ Position the lamp cables upright so that they will fit through the
rectangular opening of the lamp holder.
￭ Place the lamp on the lamp compartment cover plate with the
reflector facing down.
2
Inserting the lamp into the lamp holder
To Next Page
Loading...
