6.2 User maintenance
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
26
￭￭￭￭￭￭￭￭
￭ Guide the lamp cables through the rectangular opening of the
lamp holder.
￭ Place the lamp holder onto the lamp's reflector. The spring on the
lamp holder keeps the lamp in the correct position.
3
Connecting the lamp cables
￭ Push the two white cables all the way into the corresponding
screw terminal by hand or using tweezers.
￭ Tighten the screw terminals using the small screwdriver.
To Next Page
Loading...
