57
CHAPTER 11: MUB-MINA/LINA U-BRACKET
The MUB-MINA/LINA U-bracket (Figure 51) was primarily designed for aiming a single LINA loudspeaker in floor- and ceil-
ing-mount configurations (Figure 52). However, the U-bracket is strong enough to support arrays of up to five cabinets, or to
stack up to two cabinets in floor- and pole-mount configurations. With the U-bracket, up to two LINA loudspeakers can also
be flown from trusses using C-clamps or the equivalent.
For flying and groundstacking larger arrays, the MG-MINA/LINA/750-LFC grid is recommended (see Chapter 5, “MG-MINA/
LINA/750-LFC Grid”); for applications requiring continuous adjustability or greater downtilt and uptilt angles, the
MYA-MINA/LINA mounting yoke is recommended (see Chapter 10, “MYA-MINA/LINA Mounting Yoke”).
Figure 51: MUB-MINA/LINA U-Bracket
Figure 52: MUB-MINA/LINA U-Bracket with One LINA Loudspeaker
To Next Page
Loading...
Need help?
General
