EasyManua.ls Logo

Meyer 9100 BOSS RT - Adjustments

Meyer 9100 BOSS RT
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1-800-325-9103
9100RT - 35 - www.meyermfg.com
Annually:
Change the oil in both gearboxes. Use EP 80-90 gear lube as needed (Lighter
oil may be used in temperatures lower than 20° F.).
Every Two Years or when discolored (Oil Bath Hubs):
Prior to 2021 Model Year: Drain oil from wheel hubs by removing the
hub caps and refill, using the rubber plug (Item 10), with EP80/90 oil
every 2 yrs or if oil becomes discolored from water or other
contamination.
2021 Model Year & Later: Drain oil from wheel hubs (Item 9) and refill,
using the rubber plug (Item 10), with EP80/90 oil every 2 yrs or if oil
becomes discolored from water or other contamination.
8.2 ADJUSTMENTS
Visually inspect the tension on the apron chains through the
two slots (Item 1).
The second apron chain slat (approximately three feet back
from the front of the box) should be 1/8” to 1/4” off the return
slides (both sides).
Tighten the adjuster bolts (Item 2) at each end of the front
sprocket shaft equally.
NOTE: If adjuster bolt(s) reaches maximum travel,
remove equal links from each strand. Removable
links are provided in the chain.
Gear Box
8
9
10
Apron Chain Adjustment Bolts
1
2
2
2
2

Table of Contents