S t a r t i n g y o u r E V
3-49
system is in standby mode. Pressing
"②" or "③” will activate the cruise
control, and the cruise indicator on
the instrument cluster will remain lit,
displaying the cruise target speed.
(For example, if the driver wishes to
set the vehicle speed to 100 km/h,
they must first bring the vehicle's
speed within the range of 40 km/h to
130 km/h. Press the "①" button or
shift the shift lever "④" down twice,
then press "② " or "③ ". Release the
accelerator pedal, and the vehicle will
accelerate to and maintain a a speed
of 100 km/h.)
DRIVING YOUR EV
3
NOTE
Cruise control can only be
activated when the vehicle is in a
forward gear, the driver's seat belt
is fastened, the brake pedal is not
pressed, and the vehicle speed is
within the rated value. The
maximum speed in ECO mode +
cruise control is 80km/h
!
b. Cancel cruise
If there's an emergency ahead during
cruise control and you need to slow
down quickly, press the brake pedal
or shift the gear selector up two
gears to exit cruise mode. The cruise
indicator will flash, indicating
standby mode. To completely exit
cruise control, press button "①" and
the cruise control indicator will turn
o.
c. Resume cruise
When the vehicle exits cruise mode
and enters standby mode, press "②"
to resume cruise control at the last
set speed.
For instance, if the vehicle was
cruising at 60 km/h, then slowed to
50 km/h after braking, the cruise
indicator flashes. Press "②" to
restore the cruise indicator to
normal, and the vehicle will
automatically accelerate back to 60
km/h and resume cruise control.
To Next Page
Loading...
