S t a r t i n g y o u r E V
3-50
d. Increase cruise control speed
You can increase the cruise speed by
pressing "②" instead of using the
accelerator pedal. Each time the
button is pressed, the vehicle speed
will increase by 5 km/h. Long press ②
to continuously increase the vehicle
speed by 1 km/h. Once the button is
released, the current driving speed
will be stored in the memory and the
vehicle will maintain the speed.
e. Decrease cruise control speed
Press ③ to decrease the cruise
speed. Each time the button is
pressed, the vehicle speed is
decreased by 5 km/h; Holding the
button down decreases the speed
continuously by 1 km/h.; once the
button is released, the current
driving speed is stored in the
memory and the vehicle cruises at
this speed.
DRIVING YOUR EV
3
Emergency power-o switch*
• If the vehicle is moving slower than
2 km/h, pressing this switch will
immediately turn o the power.
• If the vehicle is moving at 2 km/h or
faster, you can turn o the power
by either holding the switch for 5
seconds or pressing it three times
in two seconds.
• In an emergency, you can restart
this function, but only if certain
conditions are met (details on
these conditions are typically in
the vehicle's manual).
• PEPS System Active: The Passive
Entry and Push Start system must
be working.
• Brake Switch: The brake switch
must be functional.
• Speed: The vehicle must be
moving slower than 2 km/h.
To Next Page
Loading...
