Brake Pedal
Check for Brake Pedal Stroke
Brake pedal stroke:
To avoid aecting the pedal stroke,
do not lay a thick carpet in the brake
pedal area.
The reasonable range of brake pedal
free travel is 0~30 mm.
If the brake pedal fails to return or
the brake pedal stroke becomes
longer, please go to the JSW MG
authorised service center for
inspection. This may indicate faults
of the brake system.
5
MAINTENANCE
R e p a i r & M a i n t e n a n c e
5-24
Fuses
Fuse replacement:
1. Open the fuse box cover.
2. Identify damaged fuses by finding
out blown fuses.
3. Use a fuse extractor to remove
the blown fuses. The fuse
extractor is in the front
compartment fuse box cover.
4. Figure out the cause of fuse
blowout and remove the fault.
5. Install new fuses with rated
current meeting the
requirements.