XTP601 User’s Manual
8 97313 Issue 5, May 2018
OPERATION
2.4 Menu Structure
The EX1 and GP1 versions of the XTP601 have front pages that do not require a passcode
but allow the user to scroll through and view oxygen concentration, recent trend, internal
parameters, minimum & maximum oxygen concentration and alarm history.
In order to change any settings on the User Menu pages, the user must enter a passcode.
There is also a separate passcode for service engineers to allow factory setting changes.
To access the User Menu press the
ENTER button from the Main Page to call up a
passcode prompt. Use the
Up () and Down () buttons and press ENTER after each
value.
The User Passcode is:
1919
From the Main Page the user can press the ESC button to view the Info Page. This page
shows the firmware version, hours used, last calibration date, calibration pressure and
the received Modbus code.
The user will be able to set up and access all functions of the transmitter versions
via the Application Software supplied. The passcode is the same as the EX1 and GP1
versions (
1919). The Application Software will be supplied on a CD with the unit.
The passcode is stored for one minute to allow access back into the User Menu, if
necessary.
To Next Page
Loading...
