Michell Instruments XTP601 - Menu Map; Front Pages (no Passcode Required); Figure 9 Menu Map

XTP601 User’s Manual
Michell Instruments 9
OPERATION
2.4.1 Menu Map
XTP601
Ver: *.**
INT. SCREEN
USER MENU
FIELD CAL
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
1-127
PRESS COMP
EXT COMP
HSR
LIMIT 0-100%
MODBUS ID
CONTRAST
O-100%
O-100%
C/F/K
psia, bara, kpa
2-60s
US/Non US
BRIGHTNESS
TEMPR UNIT
EXT PRESS UNIT
CHART INTVAL
DATE
USER SETUP PAGES
HMI
SETTINGS
Cell T Not Stable
CELL T, °C 50.0
PCB Temp, °C 28
COMP I/P OFF
EXT I/P OFF
MINIMUM 0.00 %02
D12/01 T 19:29:44
D12/01 T 19:29:44
MAXIMUM 0.00 %02
ALARM DATE TIME P1
LOW 02/01 12:50:40
HIGH 02/01 11:10:32
LOW 02/01 11:00:29
HIGH 02/01 10:20:00
ALARM DATE TIME P1
LOW 02/01 12:50:40
HIGH 02/01 11:10:32
LOW 02/01 11:00:29
HIGH 02/01 10:20:00
t
t-4
25
%
0
Enter PassCode
0 0 0 0
PASSCODE PAGE
FRONT PAGES
Firmware Ver
Hours Used
Last Cal Date
Cal Press. mB
ModBus Rx Code
h
h
h
j
j
j
j
ENTER
ENTER
ESC
ESC
Passcode
1919
or
or
or
or
1.0
125
04:08:11
1000.0
---
COMP 20%
0.50-2.00
0.50-2.00
0.50-2.00
0.50-2.00
0.50-2.00
COMP 40%
COMP 60%
COMP 80%
COMP 100%
HOURS
00-23
00-59
1-31
1-12
00-99
**:**:**
MINS
DAY
MONTH
YEAR
LIVE CLOCK
CAL TYPE
1/2 POINT
0.00-100.00
0.00-100.00
0.00-100.00
0.00-100.00
**.**
REF GAS 1
ACTUAL 1
REF GAS 2
ACTUAL 2
Adjusted ~
AL1 SETP
0.00-100.00%
0.00-100.00%
0.00-100.00%
0.00-100.00%
OFF/LOW/HIGH
OFF/LOW/HIGH
AL2 SETP
CH2 OUT ZERO
CH2 OUT SPAN
AL1 CONFIG
AL2 CONFIG
DELETE?
FIELD CAL
EXT.SENS PV
tempr
-50.0
100.0
ºC
EXT.SENS MIN
EXT.SENS MAX
UNIT
RTC
EXT SENS
EXT COMP
OUTPUTS
RESET
FIELD CAL
O2 MIN/MAX
RESET?
DELETE?ALARM LOGS
SETTINGS
HMI
RESET
OUTPUTS
EXT COMP.
EXT SENS.
CLOCK
FIELD CAL
USER MENU
5.23 % 02
Back.Gas: N2
Figure 9 Menu Map
2.5 Front Pages (No passcode Required)
The EX1 and GP1 versions of the XTP601 have 5 front pages that the user can display
without t he need for a passcode. NOTE: These are for display of information only
and there is no way of adjusting any settings on these pages.
From the Main Page (O
2
concentration) the rest of the front pages can be accessed
using the
Down () button. To return to the Main Page, either press the Up () button
the required amount of times or press the
ESC button.