Michell Instruments XTP601 - Human Machine Interface (HMI) Page; Clock Page; Figure 18 HMI Page; Figure 19 Clock Page

XTP601 User’s Manual
16 97313 Issue 5, May 2018
OPERATION
2.7.2 Human Machine Interface (HMI) Page
CONTRAST
O-100%
O-100%
C/F/K
psia, bara, kpa
2-60s
DD/MM/YY
BRIGHTNESS
TEMPR UNIT
EXT PRESS UNIT
CHART INTVAL
DATE
Figure 18 HMI Page
It is possible to change parameters within the HMI, as shown below:
Setting Description/Operation Options
CONTRAST
LCD contrast setting
0-100% in 10% steps
BRIGHTNESS
LCD backlit setting
0-100% in 10% steps
TEMPR UNIT
Global temperature unit selection
ºC, ºF, K
EXT PRESS UNIT
Pressure unit selection (for external
sensor only)
psia, bara, kPa
CHART INTVAL
Chart interval
2-60 s in 2 sec steps
DATE
Date on the LCD can be either
format
DD/MM/YY or
MM/DD/YY
Scroll down past the DATE field to access the clock page.
2.7.3 Clock Page
HOURS
00-23
00-59
1-31
1-12
00-99
**:**:**
MINS
DAY
MONTH
YEAR
LIVE CLOCK
Figure 19 Clock Page
The real time clock and calendar is used to store date/time information for log data,
min/max data and date of calibration. On entering this page all fields are initialized with
the current values. These can be also be set through the application software.
Setting Description/Operation Options
HOURS
Hours
00-23
MINS
Minutes
00-59
DAY
Day
1-31
MONTH
Month
1-12
YEAR
Year
00-99
LIVE CLOCK
Current Time
**:**:**