TABLE OF CONTENTS
SECTION 1.0 - PRODUCT SUMMARY ----------------------------------------------------------------------------------------------------------- 4
SECTION 2.0 - TECHNICAL SPECIFICATION ---------------------------------------------------------------------------------------------------- 5
SECTION 3.0 - RECEIVING INSPECTION -------------------------------------------------------------------------------------------------------- 6
SECTION 4.0 - PRE-INSTALLATION INFORMATION ------------------------------------------------------------------------------------------ 7
SECTION 5.0 - OPERATOR INSTALLATION ----------------------------------------------------------------------------------------------------- 9
SECTION 6.0 - PUSH AND PULL ARMS INSTALLATION ------------------------------------------------------------------------------------- 14
SECTION 7.0 - LEARNING CYCLE AND START UP -------------------------------------------------------------------------------------------- 17
SECTION 8.0 - ELECTRONICS CONTROLLER PROGRAMMING ---------------------------------------------------------------------------- 18
BASIC SETTINGS TABLE DESCRIBING THE CONTROLS FUNCTIONS, SETTINGS, VALUES AND DEFAULTS ------------------------- 23
SECTION 9.0 - WIRING CONNECTIONS ------------------------------------------------------------------------------------------------------- 25
SECTION 10.0 - CHANGING HANDING OF OPERATOR ------------------------------------------------------------------------------------- 29
SECTION 11.0 - SAFETY SIGNAGE AND DECALS --------------------------------------------------------------------------------------------- 33
SECTION 12.0 - TROUBLESHOOTING ---------------------------------------------------------------------------------------------------------- 34
SECTION 13.0 - DAILY SAFETY CHECKLIST ---------------------------------------------------------------------------------------------------- 36
SECTION 14.0 - ADDITIONAL INFORMATION ------------------------------------------------------------------------------------------------ 37
SECTION 15.0 - PRELOAD SPRING TENSION ------------------------------------------------------------------------------------------------- 38
SECTION 16.0 - DROP SPINDLE INSTRUCTIONS --------------------------------------------------------------------------------------------- 39
SECTION 17.0 - MISCELLANEOUS/FUTURE USE --------------------------------------------------------------------------------------------- 40
SECTION 18.0 - WARRANTY POLICY ----------------------------------------------------------------------------------------------------------- 41
To Next Page
Loading...