EasyManua.ls Logo

MICRO-EPSILON thermoIMAGER TIM Series - 2.6 Measurement Specifications (M-1;M-05)

MICRO-EPSILON thermoIMAGER TIM Series
86 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 19
Technical Data
thermoIMAGER TIM
Model TIM M-1 M-05
Temperature range
(scalable)
450
1
… 1800 °C (27 Hz mode)
500
1
… 1800 °C
(80 Hz-Modus and 32 Hz mode)
600
1
…1800 °C (1 kHz mode)
900 … 2450 °C (27 Hz mode)
950 … 2450 °C (80 Hz and 32 Hz mode)
1100 … 2450 °C (1 kHz mode)
Spectral range 0.85 - 1.1 μm 500 - 540 nm
Detector CMOS,
764 x 480 Pixel@32 Hz
382 x 288 Pixel@80 Hz (switchable to 27 Hz)
72 x 56 Pixel@1 kHz (1 ms real-time analog output (0 - 10 V) from 8x8 pixel
(freely selectable)
764 x 8 Pixel@1 kHz (fast line scanning-mode, 1 ms real-time analog output
(0 - 10 V) from 8x8 Pixel (freely selectable)
Lenses (FOV) FOV@382x288 px:
20 ° x 15 °, 13 ° x 10 °, 7 ° x 5 °, 4 ° x 3 °
FOV@764x480 px:
39 ° x 25 °, 26 ° x 16 °, 13 ° x 8 °, 9 ° x 5 °
FOV@382x288 px:
13 ° x 10 °
FOV@764x480 px:
26 ° x 16 ° (F-number = 1.4)
System accuracy
2
For object temperature < 1400 °C:
±1 % of reading for 27/32/80 Hz
±1.5 % of reading for 1 kHz
For object temperature < 1600 °C:
±2 % of reading for 27/32/80 Hz
±2.5 % of reading for 1 kHz
For object temperature < 2000 °C:
±1 % of reading for 27/32/80 Hz
±1.5 % of reading for 1 kHz
For object temperature > 2000 °C:
±2 % of reading for 27/32/80 Hz
±2.5 % of reading for 1 kHz
Temperature
resolution (NETD)
3
< 2 K (< 900 °C)
< 4 K (< 1400 °C)
< 2 K (< 1400 °C)
< 4 K (< 2100 °C)
Warm-up time 10 min
Emissivity 0,100...1,100
Software TIMConnect
1) 2 +75 °C start temperature for optics with focal length f = 50 mm and f = 75 mm
2) At an ambient temperature of 25 °C
3) Specified NETD value applies to all frequencies.

Table of Contents