MICRO-EPSILON thermoIMAGER TIM Series - 2.5 Electrical Specifications

Page 15
Technical Data
thermoIMAGER TIM
2.5 Electrical Specifications
Model TIM 160S QVGA QVGA-HD QVGA-G7
1
640 VGA M-1 M-05
Power supply 5 VDC (powered via USB 2.0 interface)
Current draw max. 500 mA
Output Standard Process
Interface (PIF out)
0 - 10 V (Main measure area, measure area, internal temperature, flag status,
recording status, line scan status, alarm, frame sync, fail-safe,
external communication), see A 11
Input Standard Process
Interface (PIF in)
0 - 10 V (Emissivity, ambient temperature, reference temperature, uncommit-
ted value, flag control, triggered snapshots, triggered recording, triggered
linescanner, triggered event grabber, reset peak-/value-hold,
switch temperature range), see A 11
Digital Input Standard
Process Interface
Flag control, triggered snapshots, triggered recording, triggered linescanner,
triggered event grabber, reset peak-/value-hold, switch temperature range
Digital interface USB 2.0