Page 74
Appendix | Industrial Process Interface (Optional)
thermoIMAGER TIM
A 6 Industrial Process Interface (Optional)
For use in industrial environment an industrial process interface with 500 VAC
RMS
isolation voltage between
TIM and process is available (connection box with IP65, 5 m, 10 m or 20 m standard or high temp cable for
camera connection, terminal for process integration).
Fig. 35 Connections of the industrial process interface
Color Designation
Gray Interrupt
Green SCL (I
2
C)
Yellow SDA (I
2
C)
White 3,3 V
Brown GND
Shield GND
Fig. 36 Pin assignment connection cable industrial PIF
To Next Page
Loading...
Need help?
General