Page 48
Instructions for Operation / Cleaning
thermoIMAGER TIM
After the calibration files have been installed the live image from the camera is shown inside a window on
your PC screen.
6. Choose the desired language in the menu Tools > Language.
7. Adjust the focus of the image by turning the exterior lens ring at the camera.
8. Instructions for Operation / Cleaning
Lens cleaning: Blow off loose particles using clean compressed air. The lens surface can be cleaned with a
soft, humid tissue moistened with water or a water based glass cleaner.
Never use cleaning compounds which contain solvents (neither for the lens nor for the housing).
> Destruction of the sensor and/or the controller
To Next Page
Loading...