MICRO-EPSILON thermoIMAGER TIM Series - Page 39

86 pages

To Next Page

To Previous Page

Page 39

Mechanical Installation

thermoIMAGER TIM

Fig. 10 Dimensional drawing TIM M-1, TIM M-05, dimensions in mm, not to scale

Main Page

Default Chapter3
- Table of Contents3
1 Safety7
- Symbols Used7
- Warnings7
- Notes on CE Marking9
- Intended Use9
- Proper Environment9
2 Technical Data10
- Functional Principle10
- Model Overview11
- General Specifications12
- Vibration / Shock13
  - Used Standards13
  - Stress Program (Camera in Operation)13
- Electrical Specifications15
- Measurement Specifications16
- Microscope Lenses20
3 Delivery22
- Unpacking22
- Storage22
4 Optical Charts23
- Notes on Focusing23
- Lenses Thermoimager TIM 160S26
- Lenses Thermoimager TIM QVGA / TIM QVGA-HD / TIM QVGA-G727
- Lenses Thermoimager TIM 640 VGA / TIM VGA-G728
- Microscope Optics TIM 640 VGA29
- Lenses Thermoimager TIM M-1 / TIM M-0530
- Lenses Thermoimager TIM M-1 / TIM M-05 with VGA Resolution31
5 Mechanical Installation32
- Dimensional Drawings33
- High Temperature Accessories - Cooling Jacket Advanced40
  - Changing the Lens40
- Fixing the Focus of the Lens (Only for TIM M-1 and TIM M-05)41
- Electrical Installation43
6 PIN Assignment of Connectors44
- Process Interface45
- Industrial Process Interface (Optional)46
- USB Cable Extensions46
7 Installation and Commissioning47
8 Instructions for Operation / Cleaning48
9 Software TIM Connect49
- Properties49
- Basic Features of Software TIM Connect51
10 Basics of Infrared Thermometry53
- Introduction53
- Application Examples56
11 Emissivity57
- Definition57
- Determination of Unknown Emissivity58
- Characteristic Emissivity59
12 Liability for Material Defects60
13 Service, Repair61
14 Decommissioning, Disposal61
Appendix62
Optional Accessories62
A 2 Dimensions Cooling Jacket Advanced65
- A 2.1 Standard Version65
- A 2.2 Extended Version66
- A 2.3 Laminar Air Purge for Cooling Jacket67
A 3 Factory Settings68
Emissivity Table Metals69
A 5 Emissivity Table Non Metals72
A 6 Industrial Process Interface (Optional)74
- A 6.1 Examples for a Fail-Safe Monitoring of the TIM with a PLC76
A 7 USB Cable Extensions78
A 8 a Brief Overview to Serial Communication80
- A 8.1 Introduction80
- A 8.2 Setup of the Interface80
- A 8.3 Command List80
A 9 a Brief Overview to DLL Communication (IPC)81
A 10 Thermoimager TIM Connect Resource Translator82
A 11 Process Interface83
- A 11.1 Analog Output83
- A 11.2 Digital Input83
- Analog Input (Usable Voltage Range: 084
- A 11.4 Relay Output at Industrial PIF (Part No.: TM-Pifcxx-TIM)85

MICRO-EPSILON thermoIMAGER TIM Series - Page 39

Table of Contents