3Flex Service Manual Preinstallation Instructions and Checklist
Aug 2013 4-1
4. DOCUMENTATION AND SOFTWARE
This chapter contains links to the documents applicable for the installation, operation, and servicing of
the 3Flex analyzer, as well as to a copy of the demo software.
Preinstallation Instructions and Checklist
This document helps to ensure that the customer has prepared the laboratory for installation of the
instrument and that the supplies, equipment, and personnel are available for installation.
• Preinstallation Instructions and Checklist, P/N: 350-42870-01
Installation
The 3Flex is installed by a qualified Micromeritics service representative.
• Installation Instructions and Checklist, P/N: 350-42870-02
Operator Training
The Operator Training Checklist is used in conjunction with the operator’s manual and software to
train the person(s) who will be operating the analyzer.
• Operator Training Checklist, P/N: 350-42870-03
Maintenance
The documents listed below are included in Service PM kits, which may be purchased by the user for
proper maintenance of his analyzer. Use of these PM plans also help to prolong the life of the analyzer.
• Maintenance Schedule, P/N: 350-42890-00
• Scheduled Maintenance Checklist, P/N: 350-42891-00 (not available)
• Scheduled Maintenance Procedures, P/N: 350-42892-00 (not available)
• As-Found Datasheet, P/N: 350-42893-00
• Calibration Certificate, P/N: 350-42894-00
To Next Page
Loading...
Need help?
General
