z Connect speaker and active microphone to Audio In / Out.
z Product CD
Product CD in the package contains:
9 NVR management software
o 36CH Live View / Recording / 4CH Playback
9 IP Scan software
9 User’s Manual
z Power on IP Camera
Use the power adapter, provided in the package, to power on the IP
camera. The adapter should be connected to 110v~22Ov AC socket.
z Connect to Network
Connect IR OUTDOOR CAMERA and network hub/switch via a standard
CAT5 Ethernet cable and RJ-45 socket. Please pay attention that the PC
must be on the same network domain with the IP camera.
z Connect I/O
Users have to make pin-to-pin correctly to enable this function.
z Enable Audio Function
The video flicker may occur when enabling or disenabling audio
in and audio out. The situation normally lasts for a second.
To Next Page
Loading...