Need help?Do you have a question about the MicroNet SP5573HDC and is the answer not in the manual?
Guide on connecting the camera to the network hub/switch using an Ethernet cable.
Guide on using the IP Scan tool to locate the camera on the network and its features.
Steps to access the IP camera's live viewing page using an IE browser and login credentials.
Specifies the default username and password for accessing the camera's administrator interface.
Explains the different network connection types (STATIC, DYNAMIC, PPPOE) available for the camera.
Setting up triggers for events like Digital Input, Motion Detection, Video Loss.
Guide on connecting the camera to the network hub/switch using an Ethernet cable.
Guide on using the IP Scan tool to locate the camera on the network and its features.
Steps to access the IP camera's live viewing page using an IE browser and login credentials.
Specifies the default username and password for accessing the camera's administrator interface.
Explains the different network connection types (STATIC, DYNAMIC, PPPOE) available for the camera.
Setting up triggers for events like Digital Input, Motion Detection, Video Loss.
General| Image Sensor | 1/2.8" Progressive Scan CMOS |
|---|---|
| Ingress Protection | IP66 |
| IR Distance | Up to 30m |
| Weatherproof | Yes |
| Resolution | 1920×1080 |
| Minimum Illumination | 0.01Lux@F1.2(AGC ON), 0Lux IR on |
| Wide Dynamic Range | Digital WDR |
| Video Compression | H.264, MJPEG |
| Max Resolution | 1920×1080 |
| Bit Rate | 32 Kbps ~ 8Mbps |
| Network Interface | RJ45 10/100M Ethernet |
| Protocols | TCP/IP, HTTP, DHCP, DNS, DDNS, RTP, RTSP, SMTP, NTP, UPnP |
| Power Supply | DC12V±10% |
| Power Consumption | <8W |
To Next Page