DOC 6501_Release V
ATS-6501 Users Guide
153
[1]
[bit_rate] 8000000
[delay] 0.000000000000000e+00
[enabled] true
[2]
[bit_rate] 4000000
[delay] 0.000000000000000e+00
[enabled] true
[OK] 2014-05-01T12:05:17Z
bitcode_list
Description: Provides a list of the bit code files loaded onto the system. If no files
are present the system will report “No Files Found”. Otherwise the operator will
see a list of files along with the file sizes.
Usage: bitcode_clock --bitrate BITRATE --delay <S> --enable <true|false> SLOT
[CLOCK]
Command Example:
ATS-6501>bitcode_list
No files found
ATS-6501>bitcode_list
Byte Size Name
--------- ----
125000 125k_hdrtrl.bin
1000000 1m_othdr.bin
1000000 1m_othdrtrl.bin
18 legacyhdrbe.bin
18 legacyhdrle.bin
The operator can also search using wildcards to obtain a more specific list of the files
loaded onto the system.
ATS-6501>bitcode_list 1m*
Byte Size Name
--------- ----
1000000 1m_othdr.bin
1000000 1m_othdrtrl.bin
[OK] 2014-05-01T12:10:14Z
bitcode_memblock
Description: This command assigns a memory block to one of the 4 8-megabit
memory blocks of a TSC4391A output card. The application software shall manage
the file I/O, download, firmware validation, and retry (if necessary). Use the
bitcode_list command to get a current listing of the bitcode files loaded onto the
system. The following example loads binary file with an 8,000,000 bit count to slot 5,
block 1.
To Next Page
Loading...
