Microsemi ATS-6501B T-Flex

To Next Page

To Previous Page

DOC 6501_Release V

ATS-6501 Users Guide

extension appended to the filename. Users will need to keep this in mind when they

attempt to open these files.

G. You can verify the data logging settings using the settings gps_logging:ftp command.

ATS-6501>settings gps_logging:ftp

[compression] true

[enable] true

[file_count] 100

[filename]

[digits] 3

[prefix] user

[suffix] nov

[type] timestamp

[interval] 15

[log_selection]

[bestposa] ontime 7200

[ionutca] ontime 7200

[rangea] ontime 60

[rawalma] onchanged

[rawephema] onchanged

[rxhwlevelsa] ontime 60

[waas9a] onchanged

[OK] 2013-08-07T20:55:18Z

H. If needed, turn the ftp logging on using the log_enable command.

ATS-6501>log_enable ftp 1

[OK] 2013-08-07T20:55:37Z

Once the data logging is enabled the settings gps_logging:ftp:enable value will = true.

Users can make changes to the desired information that is being logged by using the log

command to add logs as described above or delete a desired log using the unlog command. To

delete the desired data type use the unlog ftp [datatype] command to remove the desired data

from the list. Users can remove all of the log files simply using the unlog ftp all command.

ATS-6501>unlog ftp waas9a

[OK] 2013-08-07T20:56:19Z