Windows 7 operating system 27
VeniceU
Operator Manual
Settings option
The Settings option lets you select the buffer sizes that your PC will use for your
recording software.
Select buffer size according to your equipment, remembering that if it is too
small you will suffer audio clicks and pops, and if it is too large there will be
audible delays (latency).
Item Element
1 Isochronous Streaming frame, lets you set the stream buffer depth in
the range 1.0 ms to 16.0 ms (default is 2.0 ms). The Apply button stores
any changes.
2 Audio Buffers frame, lets you set the buffer depths for the ASIO and WDM
audio device drivers. Both buffer depths can be set between 1.0 ms (88
samples) and 80.0 ms (3608 samples), and their default is 10.0 ms (528
samples). The Apply buttons store any changes made to their associated
parameter.
3 ASIO Statistics frame, displays the number of detected drop outs, that is,
intermittent drops in audio.
To Next Page
Loading...
