Page 15
midlandusa.com
Model MXT115
To “lock” and “unlock” the keypad:
1. Be sure the radio is turned on (see 3RZHU2Q2ႇ)
2. Press and hold the Call/Lock / button for three seconds.
ƒ The Keypad Lock icon will show on the LCD display when the
keypad is “locked.”
3. Repeat steps 1 and 2 to “unlock” the keypad.
ƒ The Keypad LockLFRQZLOOWXUQRႇZKHQWKHNH\SDGLV
“unlocked”.
Using Monitor Mode
Monitor mode lets you check for activity on the current active channel. You
can also use Monitor mode to adjust the volume of your radio when not
receiving a signal.
To enter and exit Monitor mode:
1. Be sure the radio is turned on (see 3RZHU2Q2ႇ)
2. Be sure you have selected the desired channel (see Selecting the
Active Channel)
3. Press and hold the Monitor/Scan / button to enter
Monitor mode. (the display will show the icon if the radio
channel is busy)
ƒ You will hear any activity on the current selected channel.
4. Turn the Volume Knob to increase or decrease the volume
5. Once the volume has been adjusted to the desired level, press and hold
(3 seconds) the Monitor/Scan / button to exit Monitor mode.