Page 20
midlandusa.com
Model MXT115
6. When the desired Privacy Code is shown on the LCD display, press the
0RQLWRU6FDQWRFRQ¿UP\RXUVHOHFWLRQ
YOU MUST PRESS THE
Monitor/Scan BUTTON TO CONFIRM YOUR SELECTION OR THE PRIVACY CODE
WILL NOT BE CHANGED
NOTE: If you select a CTCSS Privacy Code, any pre-selected DCS
Privacy Code will be cancelled, and vice-versa.
Selecting the Transmit (TX) Power Level
The MXT115 provides two transmit power levels; HI and Lo. the Lo power
level is generally suitable when operating under optimum conditions (see
About Range). The HI power level is recommended to ensure you get
maximum range from your radio.
To adjust the Transmit Power Level:
1. Press and release the Menu button to place the radio in “Menu”
mode.
2. Use the Channel Up or Channel Down buttons to scroll the
menu options until the LCD display shows Pr
3. Press the Monitor/Scan EXWWRQWRFRQ¿UP\RXUVHOHFWLRQ
4. Use the Channel Up or Channel Down button to toggle the
transmit power setting between HI and Lo.
5. When the desired transmit power level is shown on the LCD display,
press the Monitor/ScanEXWWRQWRFRQ¿UP\RXUVHOHFWLRQ
YOU
MUST PRESS THE MONITOR/SCAN BUTTON TO CONFIRM YOUR SELECTION
OR THE POWER LEVEL WILL NOT BE CHANGED.
Note: Due to output power regulations channels 1 through 7 cannot be
removed from the Lo transmit power setting.
Adjusting Squelch Sensitivity
The MXT115 has adjustable squelch sensitivity. The minimum squelch
level of 00 is the most sensitive, which allows the squelch to open on very
weak signals. Setting the squelch to the maximum setting of 09 requires
very strong signals to open the squelch.
To Next Page
Loading...
Need help?
General