Page 16
midlandusa.com
Model MXT115
Scanning for Active Channels
Your MXT115 includes an “auto-scan” mode that continuously scans all 15
available channels for activity.
To enter and exit “auto-scan” mode:
1. Be sure the radio is turned on (see 3RZHU2Q2ႇ)
2. Press and release the Monitor/Scan / button to enter “auto-scan”
mode
ƒ The Scanning icon will show on the LCD display when the radio
is in “auto-scan” mode.
ƒ Your radio will rapidly scan through the 15 available channels and
will pause on any active channel.
ƒ “Auto-scan” will resume when there has been no activity on the
current channel for four seconds.
3. To transmit during “auto scan,” press and hold the PTT button on the
microphone while the radio is paused on the desired channel.
ƒ The radio will remain on the active channel for three seconds after
the PTT button is released.
4. To exit the “auto-scan” mode, press and release the / Monitor/
Scan button.
ƒ The ScanningLFRQZLOOWXUQRႇZKHQWKHUDGLRLVQRORQJHULQ
“auto-scan” mode.
NOAA Weather Radio/Scan
Your MXT115 has a NOAA Weather Radio function, to enable the user to
receive weather reports from designated NOAA stations. Your radio also
has a NOAA Weather Scan function, to enable the user to scan all 10
channels for the NOAA National Weather Service.
To enter and exit Weather Scan
1. Press and release the Weather button to enter weather mode.
To Next Page
Loading...
Need help?
General