Page 23
midlandusa.com
Model MXT115
Repeater Channels
Your MXT115 has the ability to access repeater channels. The use of a re-
SHDWHUFDQVLJQL¿FDQWO\LQFUHDVHDUDGLR¶VUDQJHDQGFRYHUDJHDUHD3ULRU
to using a repeater you must coordinate with the owner of the repeater to
gain permission to use the repeater. Be sure to understand and follow the
sharing and usage rules for each repeater system.
To Set the Repeater Channel:
1. Press and release the Menu button to place the radio in “Menu”
mode.
2. Use the Channel Up or Channel Down button to scroll through
the menu options until the LCD display shows rP
3. Press the Monitor/ScanEXWWRQWRFRQ¿UP\RXUVHOHFWLRQ
4. Use the Channel Up or Channel Down button to select ON or OFF.
5. Press the Monitor/ScanEXWWRQWRFRQ¿UP\RXUVHOHFWLRQ
YOU
MUST PRESS THE MONITOR/SCAN BUTTON TO CONFIRM YOUR SELECTION
OR THE REPEATER CHANNEL SELECTION WILL NOT BE CHANGED
ƒ When activated the repeater channels will be displayed as the
channel number (Ex. 15,16,17,ect.) and the rP icon
ƒ Repeater channels will appear immediatly following the standard
GMRS channels (ex: 20,21,22,15
rP,
16
rP
17
rP
etc)
Selecting the LCD Display Background Color
<RXU0;7KDVGLႇHUHQWFRORURSWLRQVIRUWKH/&''LVSOD\
background.
To select the LCD Display background:
1. Press and release the Menu button to place the radio in “Menu”
mode.
2. Use the Channel Up or Channel Down button to scroll through
the menu options until the LCD display shows db
3. Press the Monitor/ScanEXWWRQWRFRQ¿UP\RXUVHOHFWLRQ
4. Use the Channel Up or Channel Down button to selct the LCD
Display background color (01 - 08)
To Next Page
Loading...
Need help?
General