Midtronics EXP-925 User Manual

EXP-925
Midtronics B.V. Hoofdveste 6 - 8 Houten NL
www.midtronics.com
17
Chapter 4: Battery Test
Battery Test Results
After the test the tester will display the complete results in
a series of screens, see below. Use the UP/DOWN ARROW
keys to scroll through each result. To send the results to the
IR receiver, point the tester towards the IR Receiver, press
the TRANSFER soft key and wait until the hourglass has
disappeared from the screen.
Good Battery Result
Battery Decisions and Recommendations
Decision Recommended Action
GOOD BATTERY Return the battery to service.
CHARGE BATTERY Fully charge the battery and return it to service.
CHARGE & RETEST Fully charge the battery and retest. Failure to fully charge the battery before retesting
may cause false readings. If CHARGE & RETEST appears again after you fully
charge the battery, replace the battery.
REPLACE BATTERY
Replace the battery and retest. A REPLACE BATTERY result may also mean a poor
connection between the battery cables and the battery. After disconnecting the battery
cables, retest the battery using the out-of-vehicle test before replacing it.
BAD CELL–REPLACE Replace the battery and retest.
FROZEN BATTERY Thaw the battery and retest.
Battery decision
Measured voltage
Measured capacity
rating units
Rating units you se-
lected for the test
Temperature indication
Battery’s state of charge
General health of the battery and its
ability to deliver its specied perfor-
mance compared with a new battery

Midtronics EXP-925 Specifications

General

Brand	Midtronics
Model	EXP-925
Category	Test Equipment
Language	English