Installation
*INSTALLATION*
129
Risk of damage from leaking wa-
ter.
The connection point is subject to
mains water pressure. Water leaking
from it can cause damage.
You should therefore open the stop-
cock slowly and check for leaks.
Correct the position of the seal and
screw thread if appropriate. Check
the screw connections regularly to
make sure they are still tight.
Risk of damage due to excessive
pressure.
A brief increase in the water connec-
tion pressure can damage compon-
ents of the dishwasher.
This dishwasher must only be oper-
ated when it is connected to a fully
vented plumbing system.
Risk of electric shock from mains
voltage.
There are live electrical components
in the water inlet hose.
The water inlet hose must not be
shortened or damaged in any way
(see illustration).
To Next Page
