Miele G 7600 - Consumption Display (Ecofeedback); Display Brightness

Settings
44
Deleting the electricity tariff times
You can delete the settings for an elec-
tricity tariff time and in doing so deac-
tivate the EcoStartoption for this time
zone.
 Use the sensor controls to select
an electricity tariff time T1–T3 that
you wish to delete and confirm with
OK.
 For example, select Delete T1 and
confirm with OK.
 For example, select Delete T1? and
confirm with OK.
The settings for the electricity tariff time
selected will be reset.
 Confirm the message with OK.
The electricity tariff time will be deleted.
Consumption display
(EcoFeedback)
You can set whether the energy and
water consumption is displayed for the
selected programme. This function
shows the estimated consumption be-
fore a programme sequence and the
actual consumption after the end of the
programme (see “Caring for the envir-
onment – EcoFeedback consumption
indicator”).
Display brightness
You can set the display brightness to
one of seven different levels.