Miele G 7600 - Energy Management; Switching off the Dishwasher

Operation
79
Energy management
To save energy the dishwasher will
switch off automatically 10 minutes
after the last time a sensor control is
pressed or after the end of a pro-
gramme.
You can switch the dishwasher back on
again with the sensor control.
If the dishwasher has been switched off
for longer than 1minute, you will need
to hold the sensor control for a bit
longer (wipe protection).
The dishwasher will not switch itself
off whilst a programme is running or if
there is a fault.
Switching off the dishwasher
 The dishwasher can be switched off
at any time using the sensor con-
trol.
Switching the dishwasher off during a
programme stops the programme.
 Use the sensor control to select
the Switch appliance off option.
 Confirm the query Switch appliance off
with OK.
You can also do this to stop an ongoing
timer.
 Risk of damage from leaking wa-
ter.
Water leakage can cause damage.
If the dishwasher is not going to be
used for a longer period of time, e.g.
whilst on holiday, the stopcock
should be closed as a precaution.