Settings
40
Reset
This menu option only appears if you
have already connected your dish-
washer to your WiFi network.
You can use this menu option to reset
all WiFi module settings to the factory
default settings.
The network configuration should be re-
set whenever a dishwasher is being dis-
posed of or sold, or if a used dish-
washer is being put into operation. This
is the only way to ensure that all per-
sonal data has been removed and the
previous owner will no longer be able to
access the dishwasher.
Select the Reset menu option and
confirm with OK.
Remote control
This menu option will only be dis-
played if you have connected your
dishwasher to your WiFi network (see
“Settings – Miele@home”)
If you wish to permanently switch off
the Remote control option, you can do so
under this menu option. The Mobile-
Start sensor control will then no longer
be available to select until you change
this setting again.
Even if the Remote control option is
switched off, you can use the Miele app
to call up information about your appli-
ance. However, you cannot start any
programmes or change any settings
from it.
To Next Page
Loading...
