Miele G 7600 - Page 85

Options
85
Set the latest time by which the selec-
ted programme has to be finished.
 Use the sensor controls to enter
the hour and confirm your entry by
touching OK.
The hour will be saved and the minute
number block will be highlighted.
 Use the sensor controls to enter
the minutes and confirm your entry
by touching OK.
The messageWaiting for SmartStart is
displayed.
The Startsensor control lights up for a
few minutes.
The selected programme will start auto-
matically as soon as the energy supplier
has sent the signal or the latest pos-
sible calculated start time has been
reached.
The time left will appear in the display,
the sensor control will go out and the
Startsensor control will light up.
Changing or deleting the timer time
You can change the time set for the
timer or delete it.
 Touch the sensor control.
The previously activated timer function
is displayed.
 Confirm with OK.
 Use the sensor controls to select
the Change or Delete function and
confirm with OK.
After confirming the Change function us-
ing OK, you can change the time set for
the timer.
After confirming the Delete function us-
ing OK, the running time of the selected
programme will appear in the display.
The sensor control goes out and the
Start sensor control flashes.
You can now start a programme or
switch the dishwasher off.
Switching the dishwasher off while a
timer is running stops the timer.
You can also change or delete the
time set for the timer using the Miele
app.