Familiarisation
32
Overheating protection
In order to prevent the hob from being
damaged by excessive temperatures,
the overheating protection mechanism
intervenes in one of the following ways:
Overheating protection measures
- If the Booster function is switched
on, it will stop.
- The set power level will be reduced.
- A cooking zone will switch off.
will flash alternately with in the
timer display.
- All cooking zones will switch off.
Triggering the overheating protection
mechanism
The overheating protection may be
activated under the following
circumstances:
- The cookware being heated is empty.
- Fat or oil is being heated on a high
power level.
- There is insufficient ventilation to the
underside of the hob.
- A hot cooking zone is switched back
on after an interruption to the power
supply.
To Next Page
